Erecting garden screening can be a straightforward process if you follow a few simple steps. To start, you will need 75x75cm wooden posts, a screening roll, vertical rails, and concrete. Here is a detailed guide on how to erect garden screening:
1. Measure and plan: Before you start, decide on the length of the screening and the spacing between the posts. Ensure the posts are at least 2m apart to provide enough stability. Measure the area and mark the spots where the posts will be placed.
2. Dig post holes: Use a post hole digger to dig holes for each post. The holes should be approximately half the length of the posts, ensuring they are deep enough to provide stability. It’s recommended to dig the holes at least 60cm deep to ensure the posts are secure.
3. Position the posts: Once the holes are dug, place the wooden posts into the holes. Make sure they are straight and level. If necessary, use a spirit level to check the alignment. The posts should be buried at least half their length in the ground to provide stability.
4. Secure the posts: To secure the posts, pour concrete into the holes around the base of each post. The concrete should be at least 5cm thick on all sides. Ensure that the posts are held firmly in place and allow the concrete to set and dry as per the manufacturer’s instructions.
5. Attach the vertical rails: Once the posts are securely in place, attach the vertical rails to connect the posts. The rails should be placed every 50cm upwards along the height of the screening. Use screws or nails to secure the rails to the posts, ensuring they are level and parallel to each other.
6. Install the screening roll: Unroll the screening and attach it to the vertical rails using zip ties or nails. Start at one end and work your way along, making sure the screening is taut and aligned properly. Trim any excess screening if necessary.
7. Finishing touches: Inspect the entire screening installation to ensure everything is secure and aligned correctly. Make any necessary adjustments to the screening or posts if needed. Consider adding decorative elements, such as plants or climbing vines, to enhance the visual appeal of the screening.
Tips:
– Consider treating the wooden posts with a wood preservative to protect them from rot and weathering.
– If the ground is particularly soft or unstable, you can add gravel or concrete to the bottom of the post holes before inserting the posts for added stability.
– It’s essential to check local building codes and regulations before erecting garden screening, as some areas may have specific requirements or restrictions.
Personal experience:
I recently erected garden screening in my backyard to create a more private and enclosed space. I followed the steps mentioned above and found the process relatively simple. The most time-consuming part was digging the post holes, but it was crucial to ensure the stability of the screening. I made sure to measure and plan the spacing between the posts accurately and used a spirit level to ensure they were straight and level. Attaching the vertical rails and screening was a straightforward task, and I was pleased with the end result. The concrete around the base of each post provided added strength and stability to the overall structure. I now enjoy the privacy and aesthetic appeal that the garden screening provides to my outdoor space.
