Changing the oil on your lawn mower is an essential maintenance task that helps keep your engine running smoothly. Here are the detailed steps to guide you through this process:
1. Run the Engine
Start by running the engine until it’s warm. This helps to thin out the oil and makes it easier to drain.
2. Disconnect the Spark Plug
Prior to starting any maintenance on your mower, always disconnect the spark plug to ensure the engine won’t accidentally start. Secure the plug off to the side.
3. Remove the Oil Cap
Locate the oil cap on your mower and remove it to access the oil reservoir.
4. Drain the Old Oil
Position a drain pan under the mower’s oil drain plug. Unscrew the plug and allow the old oil to fully drain out into the pan.
5. Refill with New Oil
Once all the old oil has drained out, refill the oil reservoir with new, clean oil of the recommended type and viscosity for your mower.
6. Replace the Oil Cap
Secure the oil cap back onto the mower once you have refilled it with the new oil.
7. Check Oil Level
After refilling the oil, check the oil level to ensure it is at the appropriate level for optimal engine performance.
8. Clean Up
Wipe down any excess oil spills and ensure the area around the oil reservoir is clean and free of debris.
9. Reconnect the Spark Plug
Reconnect the spark plug to the engine to prepare the mower for use.
10. Start the Engine
Start the engine to allow the new oil to circulate throughout the engine.
11. Dispose of Old Oil Properly
Remember to dispose of the old oil in accordance with local regulations. Many auto parts stores and recycling centers accept used oil for proper disposal.
12. Regular Maintenance
Make changing the oil on your lawn mower a regular part of your maintenance routine to ensure the engine remains in good condition and operates efficiently.